This new electronic valve from Good Vibrations Motorsports is designed to help racers control the flow of fuel inside their vehicle. A 12VDC solenoid can be tuned to go off at a certain RPM or on a timer, making your fuel–be it gasoline or methanol–stretch farther down the quarter-mile.
Official Release:
Most mechanical fuel injections run rich at higher rpms resulting in power loss and excessive oil dilution. This lean and mean FIE electronic valve allows racers to accurately control the fuel mixture. It has a 12VDC solenoid that can be triggered with a momentary switch, by a timer or RPM activated switch. Once opened, an Enderle bypass pills control “how much” the system will be leaned out.
Great for racers looking to achieve higher rpms without sacrificing low-to mid range power. Commonly referred to as a High-Speed.
This valve can also assist with staging. Simply connect to the trans brake and the valve will lean the engine while one is up on the convertor. Release the brake and the system returns to full rich. Clutch cars also use it to keep the engine from loading up during staging when under no-load and partial throttle conditions. The result is amazing improvements in 60′ times.
The aluminum body is hard anodized for durability and has AN6 fittings for connecting your hoses. Has provision for 2 mounting bolts. Valve comes with gas and methanol compatible seals.
Features:
- Great for racers looking to achieve higher rpms without sacrificing low-to mid range power
- Also assists with staging and modulating fuel flow
- Aluminum body is hard anodized for durability
- AN6 fittings to make connections with hose lines
- Valve comes with gas and methanol compatible seals
You might also like
Barn Find Beauty: Mike Martyn’s 4,000-HP LDR ’65 Mustang Fastback
Mike Martyn spent seven years building a stunning showpiece, his LDR-legal 1965 Ford Mustang fastback, that wins on track and at car shows.
