Keeping the fuel cool can be a challenge with some engine combinations. That’s why Canton makes a Universal Fuel Cooling Tank that is easy to mount to just about any chassis thanks to the built-in mounting brackets. The designs uses water or ice to cool the fuel down before it gets to the engine. Meaning not only more power, but more consistant runs by removing the variable of heat in the fuel.
Official Release:
Cantons new Cool Can is made out of .100 Aluminum. It is TIG welded with sturdy built-in mounting brackets for the most demanding race conditions. The fluid to be cooled enters in the left rear top and exits out the right rear bottom side for easy hook up of fluid lines. It is easy to fill with ice or cool water with its large cap.
Features:
- Large top opening makes filling with ice easy
- 3/8 NPT drain plug
- Light weight aluminum construction
- 3/8 NPT in & out bungs
- Sturdy built-in mounting brackets
- Large 3 ¼ Quart ice / water fluid capacity
- 8 feet of spiraled aluminum cooling tubing
You might also like
Horsepower Wars: Why Did the Engines Go Back to the Builders?
Your questions answered: here's the rundown on why the LS vs Coyote 3 engines were sent back to the builders before the C10 Shootout.
