Electronic fuel injection (EFI) provides precise control over how much air and fuel enters your engine versus a carburetor. You don’t have to go out and buy a brand new intake if you want to move to EFI from carburetion, thanks to Induction Solutions — all you have to do is provide an intake and a few other parts so Induction Solutions can create a custom EFI set up for your engine.
There really aren’t that many hard parts required to convert your current intake to an EFI-style intake. You need the correct set of injectors, fuel rails, and a throttle body for the conversion. You can get all of these parts from various aftermarket companies, but the trick is making them work with your carbureted intake.
Induction Solutions starts the conversion process by drilling your intake for the injector bungs that need to be welded in. The bungs are welded into place and then Induction Solutions blends the bungs into the intake’s port work. After the fuel injector bung work is finalized, Induction Solutions will fabricate a set of custom fuel rails for your intake that will deliver the fuel to each injector. The fuel rails are then mounted to the intake to make sure the injectors stay in place. Each conversion is custom fabricated based on the supplied parts and intended application.
If you’re not sure what products you’d like to use, Induction Solutions can help you select what’s needed for the conversion, and even sell you the parts required to get the EFI system set up. You can learn more about the EFI conversion services Induction Solutions offers right here on the company’s website.