Horsepower junkies are always in search for more power, and leave it up to Nitrous Express (NX) to accommodate their desires. Recently, they just launched a new kit that can provide as much as 2100 HP. Yes, you’ve read that correctly; twenty-one hundred. They just sent the official release over to us this morning, so you can read below all of the stats on this amazing piece of design.
Nitrous Express 2100HP Capable Direct Port Kit
This system includes 8 of the patented NX Shark Nozzles, 2 NX Lightning 250 Nitrous solenoids, 2 NX Lightning series fuel solenoids, anodized aluminum distribution blocks, 3/16 stainless hard lines, nickel plated fittings, Jetting for 200-2100HP, D-8 stainless braided nitrous feed lines, a high flow D-8 Y fitting, a wide open throttle switch, 40 Amp relays and relay harnesses, master arming switch, stainless bottle brackets and a 15 lb nitrous bottle with the DF5 bottle valve.
This system includes the latest technology and the best components available. For you tech hungry junkies… we will provide some details explaining what makes this nitrous system so great. The key to maximizing nitrous horsepower is to keep the nitrous in a dense liquid form until it is injected into the engine. Sharp bends in the nitrous flow path cause the nitrous flow to become turbulent which causes gaseous bubbles to form in the flowing nitrous. Dense liquid nitrous makes more power than gaseous nitrous – Period! This NX nitrous system contains the key components that ensure you are getting maximum power per pound of nitrous used. Read on and we’ll explain.
Lightning Series solenoids feature CNC aluminum bodies for the ultimate in weight savings as well as an improved flow path that allows nitrous / fuel to enter above the seat and exit out the bottom for unmatched flow. Nitrous Express only uses the highest quality, made in the USA components in its solenoids. Do not be fooled by low price come-ons, the solenoids are the most important component of a nitrous system.
The new Lightning 250 nitrous solenoids feature a proprietary design that combines a HUGE .250 orifice with an extremely low amp draw. CNC billet aluminum construction weighs half as much as Trashcan solenoids and flows 2.5 times as much. This solenoid can be ordered by itself or as an upgrade to any NX nitrous system.
The billet aluminum DF5 bottle valve not only looks great; It is packed with features including an integrated gauge port, an integrated push port, a large .500 orifice and a straight through flow path. The DF5 valve includes a locking handle to prevent accidental opening.
- D-8 stainless braided lines and Y-fittings
- Can be jetted for an additional 200-2100HP
- 15lb. nitrous bottle
- Includes everything needed for a successful install