PRI 2021: Engine Pro Debuts New LS MLS Gaskets, Mopar Windage Trays

The team at Engine Parts Group brought several new products and additions to the catalog to this year’s PRI Show, including a series of multi-layer steel head gaskets for GM engines and a clever new windage tray for classic Chrysler engines.

 

The multi-layer steel head gaskets, a new product line that Engine Pro’s Jesse Jones says has been “absolutely flying off the shelf,” is available in three, five, and seven layers, depending on the amount of “crush” and compression ratio adjustment you’re looking for. These are concentrated on GM’s Gen III and IV LS and Gen V LT platforms, specifically severe-duty nitrous, turbocharged, and supercharged engines. It also offers MLS gaskets for Duramax diesel applications, as well. Engine Pro is utilizing an OE manufacturer for these that uses a premium material, and the part numbers in its catalog even align to OE head gasket part numbers.

“These are all spring steel, Jones says,” adding, “I’m always nervous when it comes to head gaskets, because people can make a good looking head gasket, but the technology is in the spring rate, in the coatings that are applied, and of course they need a good finish. This is a big offering for us.”

Jumping from the new-age LS over to the classic Mopar big-block and Wedge/Hemi of the good old days, a product the company is excited about expanding into is a windage tray for the Chrysler 383, 400, and 440 big-blocks, and the 426 Hemi and Wedge, that significantly reduces of not all but eliminates the risk of oil leakage outside the pan versus more basic offerings.

“The old windage trays were a steel piece and you put a cork gasket on one side and a cork gasket on the other side — what could possibly go wrong there? So this is a molded tray, sealing elements are put on the both sides, so you’ve eliminated a lot of potential leak spots.  You don’t use any ’goo’ on it…no Permatex or any RTV, it will seal just the way it is,” Jones explains.

The tray also has load limiters built in so those who over-torque the tray can be protected from their own bad habits.

Article Sources

About the author

Andrew Wolf

Andrew has been involved in motorsports from a very young age. Over the years, he has photographed several major auto racing events, sports, news journalism, portraiture, and everything in between. After working with the Power Automedia staff for some time on a freelance basis, Andrew joined the team in 2010.
Read My Articles

Drag Racing in your Inbox.

Build your own custom newsletter with the content you love from Dragzine, directly to your inbox, absolutely FREE!

Free WordPress Themes
Dragzine NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

Dragzine - Drag Racing Magazine

We'll send you the most interesting Dragzine articles, news, car features, and videos every week.

Dragzine - Drag Racing Magazine

Dragzine NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

Dragzine - Drag Racing Magazine

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...


Street Muscle Magazine
Hot Rods & Muscle Cars
Diesel Army
Diesel Army
Engine Labs
Engine Tech

Dragzine - Drag Racing Magazine

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...

  • Streetmuscle Hot Rods & Muscle Cars
  • Diesel Army Diesel Army
  • Engine Labs Engine Tech

Dragzine - Drag Racing Magazine

Dragzine

Thank you for your subscription.

Thank you for your subscription.

Dragzine - Drag Racing Magazine

Thank you for your subscription.

Thank you for your subscription.

Loading