A fuel system’s sole purpose is to move whatever fuel is in your tank to the engine. This may seem like a simple task, but if you don’t have the right parts for the job your engine might not get enough fuel. Fuelab’s new 868 line of PRO Series fuel filters have been designed to be less restrictive, while still catching any contaminants that could be in your fuel.
Fuelab has a very robust line of fuel pumps, regulators, and filters that cover virtually any application you can think of. The 6.0 gallons per minute (GPM) PRO Series spur gear fuel pump and 565 regulators are designed to work with engines that need to be fed a lot of fuel. Fuelab needed a fuel filter that could work in tandem with the PRO Series pump, and that’s what led to the creation of the 868 PRO Series fuel filters.
The 868 PRO Series fuel filters use all the best features of Fuelab’s other filters but are scaled up to flow as much fuel as possible. This filter has a gigantic 10 GPM flow capacity and a reduced amount of pressure drop when fuel is flowing through it. The filters come with a 40 or 100-micron stainless steel filter element that can be cleaned and reused. Each 868 PRO Series fuel filter will work with most fuels including gasoline, diesel, methanol, and ethanol. The filters are available with either 10AN or 12AN inlets/outlets.
If you’re in need of a fuel filter that can work with a high-flowing system make sure you check out the new 868 PRO Series from Fuelab. You can learn more about these filters right here on Fuelab’s website.